1. Insert reverser key
2. Turn on engine run, gen field and fuel control (access using left key for panel above windscreen)
3. Cut in brakes - lever next to brake handle
4. Apply independent brake
5. Release train brake
6. Turn on safety systems - cabinet behind driver
7. Apply headlight control switch - rear bulkhead
8. Turn on headlights - left panel
9. Start HEP and switch from "isolated" to "online" (for passenger lighting)
10. Open doors
11. Reverser forward
12. Power to P3
13. Release independent

Brakes

• Enter platform below 40mph with 40% braking
• Adjust between 30% and 40% to stop at mark