• https://sites.google.com/site/openbvesim/using-openbve/default-keyboard-controls

1. Press del to insert key
2. Press PgDn 3 times to activate ATO
3. Press "F" for forward
4. Press "A" a couple of times to get to "N" for neutral brakes
5. Press "F2" to get external camera to look at the doors and check they are open
6. Press "F5" to close the left side doors
7. Press "5" and "8" for a few seconds to get moving

1. Press del to insert key
2. PgUp / PgDn to operate master control switch (MCS) - Full speed manual to drive.
3. Put brake into B3
4. Spacebar to twist traction and brake control (TBC)
5. Z to accelerate
6. Q to brake
7. Spacebar to untwist TBC. Open close doors F5/F6
8. Spacebar to twist TBC to continue driving.

1. Ins to reset tripcock
2. 0 to acknowledge alarms / Enter button on TMS pad
3. 8 and 9 to scross through TMS items. 0 to enter.
4. 2 for previous screen on TMS.
5. Return for whistle
6. F5 / F6 for doors.
7. Home to open/close nearside cab door. End for offside.
8. 1 to activate emergency brakes